D-Link Support Publishing       \NDIS\PATHWAY.TXT              July 1996

        D-Link PCI Family Ethernet Adapter Installation
                   for WIN/TCP PathWay Access

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     A PCI compatible computer
     WIN/TCP PathWay Access
     A PCI Family Series Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable with this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any PCI Family Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      D-Link Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Install Win/TCP Pathway Access

     Copy the DLKPCI.DOS file into your C:\LANMAN directory.

     Change to the C:\LANMAN directory, and create a PROTOCOL.INI text file 
      with the following statements:

                [DLKPCI]
                drivername = DLKPCI$

     Add the following statements to your CONFIG.SYS file:

                device=c:\lanman\DLKPCI.DOS

     Add the following statements to your AUTOEXEC.BAT file:

                ndis
                winbind
                wintcp

     Reboot and Win/TCP Pathway should be active.