NetWare 5.1

Installation:
-------------
Follow this sequence for installation under NETWARE.

1.Install the NIC into a PCI slot of a NetWare server and note the slot 
  number for driver configuration later (slots are generally numbered 
  top/front to bottom/back of the machine). It is recommended that NetWare 
  5.1 with Support Pack 1 or later be installed. To install the driver,copy 
  the DLKNSD.LAN & DLKNSD.LDI files onto a floppy disk.

2.Load NWConfig.nlm and follow the 'Driver Options->Configure Network drivers
  ->Select a driver' options on the UI. Follow on-screen directions to point 
  to the drivers installed on floppy (A:\NETWARE). Put the slot number and 
  the number of Tx,and Rx Descriptors as required.

3.Alternately, driver can be loaded from the command line (e.g.
  load A:\NETWARE\DLKNSD.LAN)& passing the required parameters. This will 
  also display the available slot options for the NIC.

4.The DLKNSD.LAN may also be configured at OS install time and can be used 
  in conjunction with the auto-detect feature on NetWare Install.

5.The different options for speed and duplex mode can be configured using 
  NWConfig at installation time or Inetcfg later.
  