D-Link DMF560TX 10/100 Fast Ethernet+56K Fax/Modem PC Card

        Installation for Microsoft Windows Millennium

  **********
  *Contents*
  **********

       Introduction
       Getting Started
       Modem Diagnostics
       Add LAN protocols
       Troubleshooting

  **************
  *Introduction*
  **************

       Windows Millennium provides a complete "Plug and Play" System that will
       automatically recognize and configure most PC Cards.

       Before inserting your LanModem PC Card, the system's PCMCIA chipset
       must be enabled and functioning. The PCMCIA chipset is responsible
       for controlling the systems interface for PC Cards. Please consult
       the system's manual or manufacture for use with Windows Millennium.

       Multifunction PC Card put a heavy demand on a system's resources.
       Please resolve all system conflicts, errors, and Windows Millennium
       issues before installing the LanModem.

       Please have the installation media for the Windows Millennium ready for
       any request for files.

  *****************
  *Getting Started*
  *****************

       Power off your computer and remove all of PC Cards.

       Turn on your computer and insert the DMF560TX PC Card into a free PC Card Slot.
        Windows will detect this device automatically.

       Insert the device driver disk into the floppy disk drive.

       Choose "Specify the location of the Driver (Advanced)" and click Next.

       Choose "Specify the location" and type A:.  Click Next.

       Expect a minor delay and the appropriate driver for this device should be found.
        Click Next.

       Click Finish. Then the software installation for this device will be completed successfully.

       If prompted to restart Windows Millennium, click Yes.


  *******************
  *Modem Diagnostics*
  *******************

      Open the MY COMPUTER

      Run the CONTROL PANEL

      Run the MODEMS

      Select LanModem Card and Click Properties icon

      Click Diagnostics tab and Click Refresh icon


  *******************
  *Add LAN protocols*
  *******************

      Open the MY COMPUTER

      Run Network Connections

      Click Local Area Connection and Select File/Properties

  *****************
  *Troubleshooting*
  *****************

      When using modem application tools, type AT command and get no respones,
       Select "Direct to COM2(COM3, COM4), instead of LanModem Card.

